Project

General

Profile

TH3-Installation » History » Version 6

Wil van Antwerpen, 12/08/2019 01:26 AM

1 1 Wil van Antwerpen
# Installation
2 1 Wil van Antwerpen
3 4 Wil van Antwerpen
It pretty much is unzip, register in a DataFlex Studio (DF18.1 to DF19.1), compile and run. (^1)
4 1 Wil van Antwerpen
5 1 Wil van Antwerpen
The latest download can be found here: https://projects.vdf-guidance.com/projects/hammer/files
6 1 Wil van Antwerpen
7 4 Wil van Antwerpen
There's also a subversion repository which holds the development version and will contain the latest fixes.
8 4 Wil van Antwerpen
The Subversion repository for The Hammer3 is: http://svn.vdf-guidance.com/TheHammer/branches/Hammer3
9 5 Wil van Antwerpen
This branch is he stable branch and will still get fixes and patches for as long as The Hammer 4.0 is not released as stable.
10 5 Wil van Antwerpen
11 6 Wil van Antwerpen
The trunk of the Hammer subversion repository (http://svn.vdf-guidance.com/TheHammer/trunk/Hammer ) is considered unstable and contains the current development source for The Hammer 4.0.
12 1 Wil van Antwerpen
13 4 Wil van Antwerpen
If you had an older setup of The Hammer 2.x then we recommecd strongly to unzip in a new folder as otherwise your settings are going to be wrong and you might end up compiling the wrong files as files have moved.
14 4 Wil van Antwerpen
15 4 Wil van Antwerpen
Note on compiling with DataFlex 19.1, there's a lot of warnings due to the new warning checker in the compiler. This will not be resolved in The Hammer 3.0 as this is one of The Hammer 4.0 goals (among others)
16 3 Wil van Antwerpen
17 2 Wil van Antwerpen
(^1) As it is, for the moment you will have to have a DataFlex runtime pre-installed in order to be able to run The Hammer. We are hoping to be able to offer an installer later that takes care of this dependency for non DataFlex users, if we can get Data Access to sponsor a runtime for this purpose that is.
18 1 Wil van Antwerpen
19 1 Wil van Antwerpen
## Reset the settings
20 1 Wil van Antwerpen
21 1 Wil van Antwerpen
The default settings are available in the program's folder in a file called "CODEMAXEDIT.INI"
22 1 Wil van Antwerpen
23 1 Wil van Antwerpen
Yep, it's a legacy name, but still used.
24 1 Wil van Antwerpen
25 1 Wil van Antwerpen
Your settings are saved in the data folder of the Hammer workspace in a file "CODEMAXEDIT<username>.INI"
26 1 Wil van Antwerpen
27 1 Wil van Antwerpen
So if your windows username is "Paul" then the settings are saved in "CODEMAXEDITpaul.INI"
28 1 Wil van Antwerpen
29 1 Wil van Antwerpen
If you have a need to reset your settings then rename the "CODEMAXEDIT<username>.INI" file.