Project

General

Profile

TH3-Installation » History » Version 2

« Previous - Version 2/6 (diff) - Next » - Current version
Wil van Antwerpen, 05/19/2019 01:29 AM


Installation

It pretty much is unzip, register in a DataFlex studio (DF18.1 or later), compile and run. (1)

The latest download can be found here: https://projects.vdf-guidance.com/projects/hammer/files

If you had an older setup of The Hammer 2.x then we recommed strongly to unzip in a new folder as otherwise your settings are going to be wrong and you might end up compiling the wrong files as files have moved.

(1) As it is, for the moment you will have to have a DataFlex runtime pre-installed in order to be able to run The Hammer. We are hoping to be able to offer an installer later that takes care of this dependency for non DataFlex users, if we can get Data Access to sponsor a runtime for this purpose that is.

Reset the settings

The default settings are available in the program's folder in a file called "CODEMAXEDIT.INI"

Yep, it's a legacy name, but still used.

Your settings are saved in the data folder of the Hammer workspace in a file "CODEMAXEDIT.INI"

So if your windows username is "Paul" then the settings are saved in "CODEMAXEDITpaul.INI"

If you have a need to reset your settings then rename the "CODEMAXEDIT.INI" file.